Digital angle finder tools

Digital goniometer is designed to measure and transfer angles (horizontal and vertical) during the carpentry, joinery and general construction works. For example, when doing interior decoration according to the exact dimensions and when manufacturing staircases or outdoor coating of buildings and structures. Using the goniometer you can successfully carry out mounting elements, roof timbers, frameworks, staircases and other structures with a definite rake. Goniometer allows you to control the assembly of building elements, the installation of building equipment and different constructions.
Using a goniometer makes angles measuring and marking faster and more convenient.

The device is equipped with high-contrast backlit display, with the functions of the bisector (the division of the measured angle in half), fixing the value of the measured angle on the display and the ability to put an angle from 0 ° from any position of a mobile strap of the goniometer. For convenience, there is a function of the inversion of indications on the display.

Electronic level – a digital goniometer allows getting data about the rejection of the body from the horizontal in degrees or percentage quickly on the LCD display. Beep will report that the level is installed horizontally or vertically. And the possibility to count deviations in degrees from the horizontal will allow to use it as a goniometer.

When passing the vertical angle of 90 ° the arrows on the LCD display will turn in another direction. So the operating range of 90 ° in the four parts of the circle of 360 °.

It is often used for routine control of the deflection angles of bearing metal wares in hangars and industrial buildings, lighting columns at the professional level, accurately and conveniently! Being small and compact, it’s easy to operate and carry. Deviations are displayed on the LCD display in degrees or percent. The scope of work on the angles measurement is 4 x 90 °. The position of 0 ° and 90 ° is confirmed by an audible signal. Automatic flipping (inversion) of the display is designed for measurements over the head. The button "fix the result on the display" is made for easy reading. It has a magnetic base. Thread of 1 / 4 for mounting on a tripod or other base.

Digital inclinometer is designed to determine deviations of elements of different constructions from a horizontal or vertical position, the check the surface. It allows determining the angle accurately. Inclinometer may be used to determine the exact angles, corners and horizontal surface. The results of the measurements in degrees or percentages are reflected in the LCD display. For high comfort when working overhead information on the display can be turned on 180 degrees. The last measurement can be recorded in the memory cell level. Built-in horizontal and vertical bubble levels allow you to use the level as a balance level.